Exhaust System, Stock


 

MUFFLER, SITO BRAND-SERIES 3

US$102.30 US$97.19

Aftermarket Sito brand, manufactured in Italy. Not the same quality, fit, sound, or finish as Tutto Lambretta systems, but performance is acceptable if the baffle in the header pipe entry is drilled out. We recommend drilling at least three 3/8in. holes for optimum performance. Matte black or dark metallic silver finish.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture five variations of mufflers just for Series 3 models! Every TL muffler is made to exact Innocenti specifications–from the design of the internal baffling, to the shape of the brackets, the precise stampings, the IGM and Innocenti part numbers, and even the correct clover leaf shaped tailpipe. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket! You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version is for Series 3 Li125, Li150, Li125/Li150 Special models up to about 1966. Marked T. Lambretta on back side of main bracket; does not have third bracket for lug underneath the engine case as seen on late Series 3s.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture two variations of mufflers for Series 1/2 models, even though Innocenti issued only one part number for both Li and TV models. Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, and even the IGM and Innocenti part numbers.

A dead giveaway that other companies mufflers are not made to Innocenti specifications is their practice of making both top and bottom halves of the muffler from the same stamping to cut costs. The people at TL were so insistent on making a product to exact Innocenti specs that they invested in two separate stampings for the top and bottom halves, just like the originals. This attention to detail carries on throughout their construction, and is what prompted them to issue separate Li and TV versions after cutting open some original equipment systems for pattern making. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket!

You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version is for all Series 1/2 Li125 & Li150 models, and it is marked T.Lambretta on the back side of the main bracket. For proper performance on Li Series 1 and 2 machines over 150cc, use muffler #0301.AF2TV. Original black finish, requires separate tailpipe #303.A.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture two variations of mufflers for Series 1/2 models, even though Innocenti issued only one part number for both Li and TV models. Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, and even the IGM and Innocenti part numbers.

A dead giveaway that other companies mufflers are not made to Innocenti specifications is their practice of making both top and bottom halves of the muffler from the same stamping to cut costs. The people at TL were so insistent on making a product to exact Innocenti specs that they invested in two separate stampings for the top and bottom halves, just like the originals. This attention to detail carries on throughout their construction, and is what prompted them to issue separate Li and TV versions after cutting open some original equipment systems for pattern making. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket!

You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version is for all Series 2 TV175 models, and is marked T. Lambretta TV on the back side of the main bracket. It must also be used on Li Series 1 or 2 models when bored to 175cc or more. Do not use on standard Li Series 1 and 2 machines. Original matte black finish, requires separate tailpipe #303.A.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture five variations of mufflers just for Series 3 models! Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, the IGM and Innocenti part numbers, and even the correct clover leaf shaped tailpipe. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket! You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version has third bracket for lug underneath the engine case on late Series 3s. Marked T. Lambretta on back side of main bracket. Also for Serveta Li150 Special. Original matte silver finish.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture five variations of mufflers just for Series 3 models! Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, and even the IGM and Innocenti part numbers. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket! You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version is for all Innocenti DL/GP125-150-200 models. Marked T. Lambretta, but easily spotted by the oval shaped tailpipe tip. This is for Italian spec DL125/150/200s using the late Series 3 type u-bend. Do not confuse with large bore Indian GP200 system #301.E. Can also be used on Indian SIL Grand Prix models in conjunction with u-bend #302.A. Original matte silver finish.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture five variations of mufflers just for Series 3 models! Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, the IGM and Innocenti part numbers, and even the correct clover leaf shaped tailpipe. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket! You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version is for early Series 3 SX150, SX200, TV175 and TV200 models. Marked T. Lambretta SX on back side of main bracket. Does not have 3rd bracket for 8mm bolt underneath engine case on late Series 3s. Also for Li models bored to 175cc & up. Original matte silver finish.

We are the exclusive North American importers for the highest quality original specification Lambretta mufflers available anywhere - Tutto Lambretta brand mufflers made in Italy. Their attention to detail is such that they manufacture five variations of mufflers just for Series 3 models! Every TL muffler is made to exact Innocenti specifications - from the design of the internal baffling, to the shape of the brackets, the precise stampings, the IGM and Innocenti part numbers, and even the correct clover leaf shaped tailpipe. In fact, the only way to tell a TL muffler apart from an original Innocenti one is to unbolt it from the engine and look for their logo on the back side of the bracket! You will get more power, longer life, and the most original exhaust note possible from a Tutto Lambretta muffler when compared to any other stock replacement muffler on the market. This version has the third bracket for mounting to the lug underneath the engine case on late Series 3s. Also for Serveta Jet200, Lis bored to 175cc & up. Original matte silver finish.

MUFFLER-S1/2-S.I.L.

US$61.74 US$58.66

Indian made version of Series 2 muffler. Not the same quality of fit, finish, performance, or durability when compared to a Tutto Lambretta muffler, but what did you expect for about 1/4 the price?

20055070-MUFFLER-J100

US$190.62 US$181.09

Original quality Item, made in Italy to Innocenti specs.

20155070-MUFFLER-J50

US$171.73 US$163.14

Italian made original replacement muffler. Good quality in fit and finish.

MUFFLER-J RANGE-INDIAN

US$84.96 US$80.71

Muffler for J Range models, made in India. Decent quality.

20355070-MUFFLER-J125

US$110.88 US$105.34

Original quality, made in Italy to Innocenti specs

GP200 LARGE BORE MUFFLER-S.I.L.

US$125.40 US$119.14

Indian made large bore GP200 muffler as fitted to the last of the factory SIL GP200 models. Not as nice looking as other large bore systems on the market (it will need repainting to be presentable), but performance is better due to the smoother inner diameter of the u-bend. (NOTE: must be used with U-bend #302.DI)

12184003-MUFFLER-LD3

US$233.94 US$222.24

Tutto Lambretta makes the highest quality Lambretta mufflers in the world. They are made to exact original Innocenti specifications in every respect, from their construction, fit and finish, to their performance, durability and sound. Tutto Lambretta mufflers for LD and earlier models are easily recognized by the machined flange which is welded to the top of the header pipe as per original. All other Italian manufacturers cut corners by just flaring out the tubing at the top, which leads to a weak joint and constant leakage. This particular version was originally fitted to LD Mk3 models in 1957, but it will work great on any LD or D. It is easily recognizable by the short female exhaust stub which will accept tailpipe #0303.B.

MUFFLER-LC/C

US$173.28 US$164.62

Decent quality Italian made system that will fit 125C/LC models.

Tutto Lambretta makes the highest quality Lambretta mufflers in the world. They are made to exact original Innocenti specifications in every respect, from their construction, fit and finish, to their performance, durability and sound. Tutto Lambretta mufflers for LD and earlier models are easily recognized by the machined flange which is welded to the top of the header pipe as per original. All other Italian manufacturers cut corners by just flaring out the tubing at the top, which leads to a weak joint and constant leakage. This version was originally fitted to LD Mk1 models in 1952, but it was also fitted to some early Mk2 models and will work great on any LD model. The tailipipe can be left as is, or it can be cut shorter, leaving 1.5in exposed to clamp on chrome silencer #0303.C as fitted to Mk2 models.

Tutto Lambretta makes the highest quality Lambretta mufflers in the world. They are made to exact original Innocenti specifications in every respect, from their construction, fit and finish, to their performance, durability and sound. Tutto Lambretta mufflers for LD and earlier models are easily recognized by the machined flange which is welded to the top of the header pipe as per original. All other Italian manufacturers cut corners by just flaring out the tubing at the top, which leads to a weak joint and constant leakage. This version was originally found on 150D and Mk2 125/150LD models in the mid-1950s. It was also used on some Mk3 LDs in 1957 and will work great on any version of D or LD. It has a short built-in tailpipe with a straight outer tube which slips over the outlet pipe and is held in place by an 8mm nut at the end of the pipe, and two brass allen plugs on the left side to allow access for cleaning out carbon deposits.

15056120-MUFFLER-TV1

US$708.72 US$673.28

TV175 Series 1 muffler. Hand crafted in Italy to original Innocenti specifications. Painted with a high heat resistant flat black coating as per original. Allen plugs not included.

19918010-U BEND-LI3

US$44.94 US$42.70

Early Series 3 type header tube, no longer available. Later type part 0302.B supercedes and offers better performance.

SX type header tube for all standard Series 3 exhaust systems. Replaces earlier Li type part #0301.A

19218090-U BEND-S1/2

US$39.72 US$37.74

U-bend header tube for all Series 1/2 stock exhaust systems

For use only with original equipment SIL GP200 muffler #0301.EI

15056090-HEADER PIPE-TV1

US$134.22 US$127.51

Header pipe for TV175 Series 1. Hand crafted in Italy to original Innocenti specifications.

Original style torpedo shaped tailpipe, stamped with IGN numbers.

19018070-TAILPIPE-LI1 PRE-MOD

US$32.77 US$31.13

Plain tube type tailpipe for early Li Series 1 machines

12181431-EXHAUST TAIL PIPE-LD3

US$29.22 US$27.76

Plain tube type tailpipe for LD Mk3 models with muffler #0301.J

 

MUFFLER, SITO BRAND-SERIES 3

US$102.30 US$97.19

Aftermarket Sito brand, manufactured in Italy. Not the same quality, fit, sound, or finish as Tutto Lambretta systems, but performance is acceptable if the baffle in the header pipe entry is drilled out. We recommend drilling at least three 3/8in. holes for optimum performance. Matte black or dark metallic silver finish.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00