Tires, Wheels, Brakes & Hubs


 

WIDE WHEEL RIM-LI/SX/TV/GP

US$67.02 US$63.67

Standard Lambretta wheel rims are 3 inches wide, but these extra boss rims are a whopping 3.75 inches wide and offer better grip thanks to the larger contact patch they provide. Super Bad when fitted with a larger 100/90x10 or 4.00x10 tire. Metallic silver or white powdercoat finish, hardware included. Beware of cheaper rims on the market which do not come in contact the centering lugs on the brake hubs.

Standard Lambretta wheel rims are 3 inches wide, but these extra boss rims are a whopping 3.75 inches wide and offer better grip thanks to the larger contact patch they provide. Super Bad when fitted with a larger 100/90x10 or 4.00x10 tire. Lustrous chrome plated finish with chrome cap nuts included.

FRONT HUB SPACER TUBE-D/LD

US$5.70 US$5.41

Spacer between the two front axle bearings in the front hub on all D & LD models

Bushing that rides in the outer left side oil seal on the front hub of all D & LD models

Bushing that rides in the inner right side oil seal in the front hub on all D & LD models

19945110-REAR HUB-LI/SX/TV

US$86.34 US$77.71

Italian made rear hub for all Li/SX/TV/GP/Serveta models (except TV175 Series 1). This is the latest Series 3 type hub that has three holes for the lock ring set screw (these holes are also used to attach the rear hub puller #1404.A). Note that hub cones with three different tapers have been used at various times, and that you must use the cone which comes with the new hub to ensure proper fit. Also note that the proper torque spec on the center nut is 150 ft/lbs, and failure to tighten the nut to this spec can cause the hub to come loose while riding.

20057020-REAR HUB-J

US$72.78 US$69.14

New Italian made hub including rim mounting studs and cone

11161044-REAR HUB-POST 57 LD/D

US$190.62 US$181.09

For 1957 & later models - for use with back plate #11331016

Bare hub alone without back plate, bearings & seals, axle, or brake shoes, for all Series 1/2/3 models with drum brakes. NOS later type with threaded rim mounting studs

15044130-DRUM BRAKE FRONT HUB-TV1

US$164.64 US$156.41

Bare hub alone without back plate, bearings & seals, axle, or brake shoes, for all Series 1 Li/TV models. NOS early type with rim mounting studs cast in place.

Italian made disc brake hub alone without backing plate, bearings, seals, axle, or brake pads

Bare hub alone without back plate, bearings & seals, axle, or brake shoes, for all J range models. Includes threaded rim mounting studs

Bare hub alone without back plate, bearings, seals, axle, or brake shoes, for most D/LD Mk2/3 models. For use with post-mod back plate #703.E

WHEEL RIM-LI/SX/TV/GP

US$42.42 US$40.30

Italian made 10 inch wheel rim for all Li, SX, TV, GP, DL, and Serveta models. Both halves with hardware, painted metallic silver. Original part numbers for each rim half are 19044034 and 19044060.

CHROME STD WHEEL RIM-S1/2/3

US$65.88 US$62.59

Standard width chrome wheel rim for all Series 1, 2 & 3 models

WHEEL RIM-J RANGE

US$54.84 US$49.36

Complete 10 inch wheel rim (2 halves w/hardware) for all J100 and J125 models. Metallic silver finish, made in Italy. Original part numbers for each half are 20021060 and 20021021.

WHEEL RIM-LD/D

US$61.98 US$58.88

One complete rim (2 halves w/hardware) for 8 inch wheel models (B, C, LC, D, LD). Zinc plated finish, ready for painting. Original part numbers for each half are 03160808 and 03161056.

Drum shoes for the rear brakes on all Li, SX, and TV models except for TV175 Series 1 and the front on brakes on all Series 1, 2 and 3 models except for disc brake Series 3 SX and TV models.

BRAKE SHOES-SLOTTED, PAIR-LI

US$42.36 US$40.25

Slots in the braking material on these shoes divert brake dust and water away from the brake drum to improve braking performance. These fit the front brakes on all Series 1, 2, and 3 models (except GP/DLs and Italian SX and TV3 models with disc brake), and the rear brakes on all Series 1, 2, and 3 models (except GP/DL and TV Series 1).

22044040-BRAKE SHOES-PAIR-GP

US$32.76 US$31.13

Drum shoes for front and rear use on all Italian and Indian GP and DL models (except for front disc brake on Italian GP/DL200).

BRAKE SHOES-SLOTTED-GP-PAIR

US$36.90 US$35.05

Slotted performance shoes for front and rear use on all Italian and Indian GP and DL models (except for front disc brake on Italian GP/DL200).

Italian made disc pads for all original equipment front disc brakes as found on Series 3 TV175/200, SX200 and GP200 models.

20021040-BRAKE SHOES-PAIR-J

US$40.98 US$38.93

Pair of drum brake shoes for all J Range models, made in Italy to original specs.

 
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00