Body Rubber Trim Components


 

Gray rubber beading for the edge of the legshield on all Series 1/2/3 machines. Also known as part number 15050062 in Series 1/2 parts books. Sold in pairs only.

Black rubber beading for the edge of the legshield on all Series 1/2/3 machines. Sold in pairs only.

20034024-LEGSHIELD BEADING-J

US$21.96 US$20.87

Gray rubber beading for the edge of the legshield on all J Range machines. Single piece that wraps all the way around both sides of legshield.

Upper and lower cap assembly (2 halves with screw) for the legshield beading on all Series 1 & 2 models.

Single piece gray rubber beading between the fender and the legshield for all J range models

Grey beading for the left side of the horn casting on all Series 3 models. Note that the notch to clear the mounting screw may not be pre-cut, and that the notch goes on the inside of the strip at the bottom, rather than on the outside at the top. Also note that the strips are shown in pairs in the picture, but they are sold separately.

Grey beading for the right side of the horn casting on all Series 3 models. Note that the notch to clear the mounting screw may not be pre-cut, and that the notch goes on the inside of the strip at the bottom, rather than on the outside at the top. Also note that the strips are shown in pairs in the picture, but they are sold separately.

Black beading for the left side of the horn casting on all Series 3 models. Note that the notch to clear the mounting screw may not be pre-cut, and that the notch goes on the inside of the strip at the bottom, rather than on the outside at the top.

Black beading for the right side of the horn casting on all Series 3 models. Note that the notch to clear the mounting screw may not be pre-cut, and that the notch goes on the inside of the strip at the bottom, rather than on the outside at the top.

Grey beading for the right side of the horn casting on all Series 1&2 models. Note that the notches to clear the mounting screw may not be pre-cut, and that the strips are shown in pairs in the picture, but they are sold separately.

Grey beading for the right side of the horn casting on all Series 1&2 models. Note that the notches to clear the mounting screw may not be pre-cut, and that the strips are shown in pairs in the picture, but they are sold separately.

Grey beading for the left side of the horn casting on all LD and LC models. Note that the notches to clear the mounting screw may not be pre-cut, and that the strips are shown in pairs in the picture, but they are sold separately.

Grey beading for the right side of the horn casting on all LD and LC models. Note that the notches to clear the mounting screw may not be pre-cut, and that the strips are shown in pairs in the picture, but they are sold separately.

 

Gray rubber beading for the edge of the legshield on all Series 1/2/3 machines. Also known as part number 15050062 in Series 1/2 parts books. Sold in pairs only.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00